3M™ Marine Restorer and Wax is a quick and easy way to restore and protect your boat's finish. This product is designed to be used on fiberglass, metal, and painted surfaces and contains special ingredients that protect against salt water and ultraviolet light. With just a few simple steps, you can keep your boat looking like new. Read below for detailed instructions on how to use 3M™ Marine Restorer and Wax.
Step 1: Clean the Surface
Before you can apply the restorative wax, the surface must be clean and free of dirt and debris. Start by using a garden hose to rinse the surface. Use a soft brush to scrub away any stubborn dirt and grime. Rinse the surface once more and allow it to dry completely before moving on to the next step.
Step 2: Apply the Restorer and Wax
Once the surface is dry, you can begin to apply the 3M™ Marine Restorer and Wax. Start by shaking the bottle to mix the contents. Then, using a clean cloth or applicator pad, apply the product in a thin, even coat. Allow the product to dry for about 10 minutes before buffing it to a shine.
Step 3: Buff the Surface
Using a clean cloth or buffing pad, buff the surface in a circular motion to remove any excess wax and achieve a shiny, restored finish. If the area is too large to buff by hand, you can also use a buffer or polisher. When finished, inspect the surface to ensure a uniform shine.
Step 4: Let it Cure
Once the surface has been buffed to a shine, it is time to let the product cure. Allow the 3M™ Marine Restorer and Wax to cure for at least 24 hours before exposing it to moisture. This will allow the product to form a protective barrier against salt water and ultraviolet light.
Conclusion
3M™ Marine Restorer and Wax is a great way to protect and restore your boat's finish. Just follow the four simple steps outlined above to keep your boat looking like new for years to come. With just a few minutes of your time, you can ensure your boat is well protected against the elements.